High Precision Encoder Solutions

Professional rotary and linear encoders for industrial automation, robotics, and motion control applications. Delivering accuracy, reliability, and performance.

Our Products

Encoder Product Range

PROFINET-IO Absolute Industrial Encoder

PROFINET-IO Absolute Industrial Encoder

PROFINET-IO industrial Ethernet encoder with intelligent diagnostic functions, enhancing safety and reliability in field applications. Data, temperature, voltage and time diagnostics and alarms. Programmable resolution, preset function, counting direction and speed feedback. Multi-turn absolute value using internationally leading gear set design. Six tri-color LEDs indicate operating status and Ethernet status.

Mechanical Data & Standards
• Material: Aluminum housing, Aluminum flange, Stainless steel shaft
• Shaft Load: Axial max 80N, Radial max 150N
• Protection: IP65
• Starting Torque: ≤0.5Nm at 25℃
• Max Speed: 6000 RPM
• Shock: ≤100g, 3ms
• Vibration: ≤10g (10Hz-2000Hz)
• Weight: ≈500g
• Operating Temp: -40℃ to +80℃
• Storage Temp: -40℃ to +85℃
Certifications: CE, EN61000-6-4, EN61000-6-2, ISO9001:2015, GB/T 25105.1-2014, PROFINET IO Type 10, IEC 61158
Electrical Data
• Interface: PROFINET-IO RT (Conformance Class B, SEC Level 1 Class III)
• Output Code: Binary
• Output Circuit: Ethernet
• Communication Frequency: 10/100MHz
• Interface Cycle: ≥250μs
• Working Voltage: 10-30VDC, Polarity protection
• No-load Current: ≤180mA (10VDC), ≤90mA (24VDC)
• Repeatability: ±1bit (depends on installation and shaft concentricity)
• Single-turn Resolution: ≤13-bit (8192)
• Multi-turn: ≤14-bit (16384 turns)
IP68 Submersible Absolute Encoder

IP68 Submersible Absolute Encoder

High protection rating IP68, submersible depth up to 50 meters. SSI, CANopen, RS485, analog output. Multi-turn absolute value using internationally leading gear set design. Zero point setting and counting direction setting functions.

Mechanical Data & Standards
• Material: Aluminum/Stainless Steel 304/316 housing, Aluminum/SS 304/316 flange, SS 304/316 shaft
• Shaft Load: Axial max 80N, Radial max 150N
• Protection: IP68 (CNAS certified, test report available)
• Max Speed: 6000 RPM
• Shock: ≤100g, 3ms
• Vibration: ≤10g (10Hz-2000Hz)
• Weight: ≈410g
• Operating Temp: -40℃ to +80℃
• Storage Temp: -40℃ to +85℃
Certifications: CE, EN61000-6-4, EN61000-6-2, ISO9001:2015
Electrical Data
• Interface: SSI / CANopen / RS485/Modbus RTU / 4-20mA, 0-5/10V
• Output Code: Gray/Binary / Binary / ASCII/Hex / Analog
• Output Circuit: RS422 / ISO11898 / RS485 / —
• Clock Frequency: 100KHz-1MHz / 10KHz-1MHz / 4800-115200bps / —
• Working Voltage: 10-30VDC or 5VDC, Polarity protection
• Single-turn Resolution: ≤13-bit (8192)
• Multi-turn: ≤14-bit (16384 turns)
• No-load Current: ≤80mA
• Repeatability: ±1bit (depends on installation and shaft concentricity)
• Counting Direction: Configurable (default: clockwise increases)
• External Preset: Configurable, delay >100ms
Industrial Grade Optical Incremental Encoder

Industrial Grade Optical Incremental Encoder

Full through-hole shaft, ultra-thin design, saving axial space. Double row precision bearing design, suitable for high speed or heavy load environments. Double ear spring design, resistant to high vibration environments, robust and reliable.

Mechanical Data & Standards
• Material: Aluminum housing, Aluminum flange, Stainless steel shaft
• Shaft Load: Axial max 50N, Radial max 80N
• Protection: IP65
• Starting Torque: ≤0.5Nm at 25℃
• Max Speed: 6000 RPM
• Shock: ≤100g, 6ms
• Vibration: ≤10g (10Hz-2000Hz)
• Weight: ≈310g
• Operating Temp: -20℃ to +70℃
• Storage Temp: -20℃ to +70℃
Certifications: CE, EN61000-6-4, EN61000-6-2, ISO9001:2008
Electrical Data
• Output Type: Push-pull (HTL) / RS422 (TTL) / NPN Open Collector / Voltage Output
• Power Supply: DC10-30V / DC5V or DC10-30V / DC5-30V / DC5-12V
• Reverse Polarity Protection: Yes
• No-load Current: ≤80mA
• Load Current (per channel): ≤60mA / ≤60mA / ≤50mA / ≤50mA
• Response Frequency: ≤300KHz
• Rise Time (Tr): ≤200nS / ≤200nS / ≤300nS / ≤300nS
• Fall Time (Tf): ≤200nS / ≤200nS / ≤100nS / ≤100nS
• Signal High Level: ≥Vcc×70% / ≥2.5VDC / — / —
• Signal Low Level: ≤0.5VDC / ≤0.5VDC / ≤0.4VDC / ≤0.4VDC
Compliance

Certifications

International and industry certifications for quality and interoperability

CE Certification
CANopen Certification
PI Association Test Certification
Profibus Certification

Why Choose Our Encoders

High Precision

Industry-leading accuracy and resolution for demanding applications

Robust Design

Built to withstand harsh industrial environments and extreme conditions

Easy Integration

Multiple interface options compatible with all major control systems

Long Lifespan

Reliable performance with minimal maintenance requirements

Applications

Our encoders are trusted in various industries for precision motion control and position feedback

Industrial Automation
  • CNC machines and machining centers
  • Automated assembly lines
  • Material handling systems
  • Packaging machinery
Robotics
  • Industrial robot joints
  • Collaborative robots (Cobots)
  • AGV and mobile robots
  • Robotic arms and grippers
Motion Control
  • Servo motor feedback
  • Stepper motor positioning
  • Linear actuators
  • Precision stages
Measurement
  • Coordinate measuring machines
  • Optical inspection systems
  • Precision measuring instruments
  • Quality control equipment
Printing & Textile
  • Digital printing machines
  • Label printing systems
  • Textile machinery
  • Web handling equipment
Renewable Energy
  • Solar tracking systems
  • Wind turbine pitch control
  • Hydroelectric generators
  • Energy storage systems
Technical Support

Expert Engineering Support

Our experienced engineering team provides comprehensive technical support to help you select the right encoder for your application. We offer:

  • Application consulting and product selection
  • Custom encoder solutions and modifications
  • Integration support and technical documentation
  • After-sales service and warranty support
Contact Our Engineers

Request a Quote

Nginx server needs to configure pseudo-static rules, click View configuration method