Home / Industry News

LV.A-SST-ESD-C Datasheet Guide: Adjustable Feet & ESD

GQGF LIMITED · 2026-09-04

The LV.A-SST-ESD-C, while cataloged under an electronic component SKU, is fundamentally a precision mechanical device—an adjustable foot with electrostatic discharge (ESD) properties. Therefore, interpreting its datasheet requires a shift from conventional electrical parameters to a focus on mechanical, material, and tribological specifications. This guide will dissect the datasheet's critical sections, translating them into practical engineering considerations for system integration, particularly in ESD-sensitive environments like cleanrooms, electronics assembly lines, and laboratory instrumentation.

Key Specifications and Their Practical Meaning – The most critical "electrical" specification is not voltage or current but surface resistance. The datasheet will specify a range, typically between 10^4 and 10^9 ohms, for the foot's base material. This is the defining characteristic of an ESD-safe component. In practice, this resistance range ensures that static charge dissipates slowly and controllably, rather than discharging instantly (which would be a spark hazard) or accumulating (which would attract dust and damage sensitive components). A reading below 10^4 ohms would make the foot conductive, risking rapid discharge; above 10^9 ohms, it becomes insulating, defeating its purpose. The datasheet will also specify a load capacity, usually given in Newtons (N) or kilograms (kg) per foot. For the LV.A-SST-ESD-C, this indicates the maximum static load the foot can bear without permanent deformation. This is mechanically analogous to a current rating—exceeding it leads to mechanical failure, not electrical burnout. Pay close attention to the adjustment travel, often listed in millimeters. This defines the range of height adjustment, which is critical for leveling heavy equipment while maintaining a stable, ESD-safe ground path.

Absolute Maximum Ratings and Derating Considerations – For this component, "absolute maximum ratings" translate to physical and environmental limits. The datasheet will list a maximum operating temperature range, typically -20°C to +80°C for the polyamide-based foot. Exceeding this can cause the material to soften, lose its ESD properties, or crack. More critical is the maximum static load. This value is not a fixed limit but is contingent on the mounting configuration and the substrate it is attached to. Derating is essential: if the equipment will experience vibration, shock, or off-center loading, you must derate the maximum static load by 50% or more. The datasheet may provide a derating curve showing load capacity vs. temperature. At elevated temperatures, the polymer's yield strength decreases, so the allowable load must be reduced. Additionally, consider the chemical resistance specification. Exposure to solvents, acids, or cleaning agents can degrade the ESD filler material (often carbon black or fibers) within the polymer, increasing surface resistance over time. This is a hidden derating factor—the ESD property is not permanent if chemically attacked.

Typical Application Circuit Analysis – In electrical terms, the "circuit" is the grounding path. The adjustable foot is placed in series between the equipment chassis and the conductive floor or grounding mat. The equivalent circuit is a resistor network: chassis ground → foot's top plate (stainless steel, SST in the SKU) → internal ESD polymer → floor ground. The datasheet will specify the resistance from the top mounting surface to the bottom contact point. This is the key parameter for ensuring effective grounding. A typical application involves using four or more feet to support a piece of test equipment. The analysis focuses on ensuring that the parallel combination of all feet provides a total resistance to ground that is within the required specification (often < 10^6 ohms for ANSI/ESD S20.20 compliance). The stainless steel top plate provides a low-resistance interface to the equipment's metal chassis, while the ESD polymer base provides the controlled resistance. There is no active circuit; instead, you are verifying continuity and resistance. The datasheet's "circuit" is the mechanical and electrical bond between the equipment, the foot, and the floor.

Pin Configuration and Package Considerations – The "package" is the physical foot assembly. The datasheet will show an engineering drawing with critical dimensions: thread size (e.g., M6, M8, M10), thread length, overall height, and base diameter. The "pin configuration" refers to the mounting method. The LV.A-SST-ESD-C features a threaded stud that is inserted into a threaded hole in the equipment's base. The stainless steel stud ensures a secure, corrosion-resistant mechanical and electrical connection to the chassis. The base, typically a black ESD polymer, is the "pin" that contacts the floor. The datasheet will specify the surface finish of the base—it must be smooth to ensure even contact and consistent resistance. The package also includes a lock nut, which is critical for maintaining the adjusted height during vibration. When interpreting the drawing, pay attention to the minimum and maximum height dimensions; this defines the adjustment range. Also, note the base diameter—a larger diameter provides better stability and lower contact pressure, which prolongs the life of the ESD properties.

Thermal Management and Characteristic Curves – While there is no active heat dissipation, thermal management is still relevant. The datasheet may include a load-deformation curve at different temperatures. This graph shows how much the foot compresses under a given load. At higher temperatures, the polymer becomes more compliant, leading to greater deformation and potentially a reduced effective height. This is crucial for applications where precision leveling is required. The curve should be read as follows: find your operating temperature on the x-axis, then trace up to the curve corresponding to your load, and read the resulting compression on the y-axis. This tells you how much the foot will "settle" after installation, which affects the final height adjustment. There are no traditional timing diagrams, but there may be a creep curve showing deformation over time under constant load. This is analogous to a frequency response curve. It indicates that the foot will gradually compress under load, so periodic re-leveling may be necessary. The resistance-to-humidity curve is another characteristic to examine. It shows how surface resistance varies with ambient relative humidity. Some ESD materials become more conductive in high humidity, which could alter the grounding characteristics. An ideal datasheet will show a relatively flat curve, indicating stable ESD performance across a wide humidity range.

In conclusion, reading the LV.A-SST-ESD-C datasheet correctly requires you to treat mechanical load as current, environmental exposure as voltage stress, and the ESD resistance as the core functional specification. By carefully analyzing the load-temperature curves and the resistance-stability data, you ensure that the foot not only physically supports your equipment but also maintains a reliable, safe path to ground over its entire operational life. Always cross-reference the specific part number's drawing with your mechanical mounting requirements to avoid interference and ensure a proper fit.

328861-ESD

LV.A-SST-ESD-C, ADJUSTABLE FEET,

Elesa USA Corporation | 328861-ESD | $63.89

View Product →

Related Products

Part Number / DescriptionManufacturer PackageUnit PriceAvailability QTYAdd To Cart
LV.A-SST-ESD-C, ADJUSTABLE FEET, LV.A-SST-ESD-C, ADJUSTABLE FEET,Levelling Foot Black Elesa USA Corporation— $63.89 Out of Stock0 pcs
Nginx server needs to configure pseudo-static rules, click View configuration method