Home / News

50 MOHMS 1% 1.5W Through Hole Resistor Reliability Guide: TR15G50M0FNES

GQGF LIMITED · 2026-09-30

The Vishay Techno TR15G50M0FNES is a through-hole, 50 megohm, 1% tolerance, 1.5W radial-leaded resistor from the TR series of high-voltage, thick-film power resistors. Because it operates at extreme resistance values and elevated voltages, its reliability profile differs substantially from general-purpose resistors. This guide addresses qualification, screening, and lifecycle management for professional procurement.

Reliability standards and qualifications. The TR15G50M0FNES is typically qualified to MIL-PRF-49462 or equivalent high-voltage resistor specifications, and Vishay Techno components are often listed on the Defense Logistics Agency (DLA) Qualified Products List (QPL) or qualified under MIL-STD-202 test methods. Key parameters include dielectric withstanding voltage, insulation resistance, and low voltage coefficient of resistance (VCR). For industrial and medical applications, AEC-Q200 may apply where automotive-grade variants are required. Procurement should confirm the specific qualification certificate and whether the part carries a QPL or equivalent approval, as unqualified high-value resistors can exhibit significant drift under load.

Accelerated life testing. Standard accelerated life tests for this component include load life at rated power and elevated ambient (typically 70°C or 125°C), high-temperature storage, thermal shock, and moisture resistance. Because the 1.5W rating is achieved through a ceramic substrate and thick-film element, the dominant failure mechanisms are resistance drift and open-circuit failures from film cracking or termination degradation. Accelerated results are extrapolated using the Arrhenius model, with activation energies typically 0.7–1.0 eV for thick-film resistors. A part passing 1000 hours at 125°C and rated power with less than 1% drift is generally considered reliable for long-life applications. Buyers should request the manufacturer's qualification report rather than relying on datasheet summaries.

Failure rate and MTBF. FIT (Failures In Time) rates for high-voltage thick-film resistors are usually in the range of 1–10 FIT under benign conditions, but at 50 megohms and high voltage the rate can increase due to voltage coefficient and surface contamination effects. MTBF for a single resistor is less meaningful than system-level calculations; instead, procurement should use the part's demonstrated life-test data to derive a failure rate for the intended mission profile. For high-reliability programs, a derated operating voltage (typically 50–70% of rated) and power (50% of 1.5W) will substantially reduce FIT rates. Note that the 50 megohm value makes the part sensitive to moisture and ionic contamination, which can dominate failure statistics if handling is poor.

Environmental stress screening and burn-in. ESS for this component typically includes thermal cycling (-55°C to +125°C), power burn-in at rated voltage for 100–168 hours, and a post-burn-in resistance check with a tight delta limit (often ±0.5%). Because the part is high-value, burn-in should be performed with a high-impedance measurement to avoid loading errors. Vishay may offer screened versions; if not, the buyer should specify burn-in and delta criteria in the purchase order. Screening is especially important for medical and aerospace applications where a single drift failure can be critical.

Counterfeit detection. Counterfeit high-voltage resistors are less common than semiconductors but do occur, particularly for obsolete or high-value parts. Detection methods include: verifying the Vishay Techno logo, date code, and laser marking; checking the ceramic body for uniform coating and correct dimensions; measuring resistance at multiple voltages to confirm VCR; and X-ray fluorescence to verify termination materials. Purchasing only from authorized distributors and requiring traceability to the original manufacturer is the most effective counterfeit mitigation. For the TR15G50M0FNES, confirm the part number suffix "FNES" matches the datasheet ordering code, as substituted values or tolerances are a common counterfeit tactic.

Incoming inspection. A robust incoming inspection program should sample per ANSI/ASQ Z1.4 or equivalent. Tests should include: DC resistance at 100V or lower (to avoid self-heating), tolerance verification to ±1%, visual inspection for cracks or coating voids, and solderability testing per J-STD-002. For high-reliability lots, perform a voltage coefficient check by measuring at 10% and 100% of rated voltage; a shift greater than 0.5% indicates a suspect part. Record all measurements with traceable equipment and retain samples for failure analysis.

Storage and handling. Store in original packaging in a controlled environment (15–35°C, <60% RH). Avoid ESD-generating materials, though the part is not ESD-sensitive. Handle by the body, not the leads, to prevent mechanical stress. Solder per recommended profile; excessive heat can crack the ceramic. After soldering, clean flux residues thoroughly, as ionic contamination will degrade the high resistance value. For long-term storage beyond two years, re-test solderability and resistance before use.

End-of-life and obsolescence. Vishay Techno may discontinue specific resistance values or package styles. Monitor PCN (Product Change Notification) and EOL notices from authorized distributors. For critical designs, qualify a second source or stock a lifetime buy. Because the 50 megohm value is relatively specialized, redesign to a lower value with series connection may be an option if the exact part becomes unavailable. Maintain a last-time-buy analysis that accounts for storage life and re-qualification costs.

TR15G50M0FNES

50 MOHMS 1% 1.5W THROUGH HOLE RE

Vishay Techno | TR15G50M0FNES | $5.38

View Product →

Related Products

Part Number / DescriptionManufacturer PackageUnit PriceAvailability QTYAdd To Cart
50 MOHMS 1% 1.5W THROUGH HOLE RE 50 MOHMS 1% 1.5W THROUGH HOLE RE50 MOhms ±1% 1.5W Through Hole Resistor Radial High Voltage Thick Film Vishay Techno— $5.38 Out of Stock0 pcs
Nginx server needs to configure pseudo-static rules, click View configuration method