Home / News

MEMS OSC VCXO 148.351648MHZ LVDS Comparison Guide: SIT3372AI vs Alternatives

GQGF LIMITED · 2026-10-01

When specifying precision timing for high-speed serial interfaces, the SiTime SIT3372AI-2B2-25NZ148.351648 occupies a specialized niche that blends the flexibility of a voltage-controlled crystal oscillator with the robustness of MEMS technology. This component is a MEMS VCXO—a voltage-controlled crystal oscillator built on a silicon MEMS resonator rather than a traditional quartz blank—delivering an LVDS output at 148.351648 MHz. That exact frequency is not arbitrary: it is a common reference for 10 Gigabit Ethernet, Serial Digital Interface (SDI) video, and certain optical transport network (OTN) applications where a low-jitter, tightly controlled clock is essential for serializer/deserializer (SerDes) links and clock data recovery.

In an electronic system, a VCXO serves as the tunable heartbeat for phase-locked loops. The control voltage input allows the output frequency to be pulled slightly, enabling synchronization to an external reference, jitter attenuation, or clock recovery in telecom and video broadcast equipment. Unlike a simple fixed oscillator, the VCXO’s pull range and linearity determine how well the system can track incoming signals or compensate for aging and temperature drift. For this SiTime part, the LVDS output provides differential signaling with low electromagnetic interference and high common-mode noise rejection, which is critical when the clock must travel across a backplane or between boards at 148 MHz and beyond.

When selecting a VCXO of this class, several parameters dominate the decision. Phase jitter is paramount—typically specified in femtoseconds RMS over a 12 kHz to 20 MHz integration band. For 148.351648 MHz LVDS, acceptable jitter for 10G SerDes is often below 300 fs, and premium MEMS parts can achieve under 150 fs. Frequency stability over temperature, supply voltage, and load is next, with ±25 ppm or ±50 ppm being common grades. Pull range and control voltage linearity matter if the VCXO is used in a closed loop; a wider pull range (±100 ppm or more) offers more tuning headroom but can degrade jitter if not carefully designed. Supply voltage (2.5 V or 3.3 V) and output type (LVDS, LVPECL, HCSL) must match the downstream SerDes or FPGA input. Finally, operating temperature range—industrial (-40°C to +85°C) versus commercial (0°C to +70°C)—affects both reliability and cost.

Compared to traditional quartz VCXOs, the SiTime MEMS alternative offers several distinct trade-offs. Performance: MEMS resonators are inherently more resistant to shock and vibration, with typical acceleration sensitivity an order of magnitude lower than quartz. They also eliminate the quartz blank’s susceptibility to microphonic effects and aging, which can be as low as ±1 ppm over ten years. However, quartz VCXOs still hold an edge in absolute close-in phase noise for some ultra-low-jitter applications, particularly at offsets below 1 kHz. For 148.351648 MHz LVDS, the SiTime part is highly competitive, often matching or beating quartz in integrated jitter because the MEMS resonator’s high Q and the programmable analog circuitry allow precise optimization.

Cost: MEMS VCXOs have narrowed the gap with quartz, and for low-to-medium volumes, SiTime parts are often price-competitive. At high volumes, quartz can still be cheaper, but the MEMS advantage in lead time and availability frequently offsets the unit cost difference. Availability: This is where MEMS shines. Quartz VCXOs, especially at odd frequencies like 148.351648 MHz, are often custom-cut and subject to long lead times—12 to 20 weeks or more. SiTime’s programmable architecture allows them to stock wafers and program frequencies to order, reducing lead times to 4–8 weeks for many parts.

Industry trends are pushing VCXOs toward higher frequencies, lower jitter, and smaller packages. The migration to 400G and 800G Ethernet, plus the rise of 5G fronthaul and automotive radar, demands reference clocks with sub-100 fs jitter and tight stability. MEMS timing is gaining share because it enables programmability—one silicon die can serve many frequencies, simplifying inventory. There is also a push for integrated jitter attenuators and clock generators that combine VCXO functions with fanout buffers, reducing board space. For buyers, this means fewer unique part numbers and more second-source flexibility, but also a need to validate MEMS jitter performance against legacy quartz designs.

Choose the SiTime SIT3372AI-2B2-25NZ148.351648 specifically when you need a drop-in, low-jitter LVDS VCXO at 148.351648 MHz with fast lead times, robust shock and vibration performance, and a wide industrial temperature range. It is ideal for 10G/25G Ethernet line cards, SDI video routers, and optical modules where board space is tight and reliability is non-negotiable. Avoid it if your design requires an extremely wide pull range (beyond ±200 ppm) or if your system has an existing quartz-based reference that cannot tolerate a different close-in phase noise profile without re-qualification.

Procurement considerations for this part are favorable compared to custom quartz. Lead times for SiTime MEMS VCXOs are typically 6–10 weeks from authorized distributors, with some stock available for immediate shipment. Lifecycle status is active and not near end-of-life, as SiTime continues to expand its VCXO portfolio. Second-source options are limited because MEMS VCXOs are not pin-compatible across brands; however, you can often substitute a quartz VCXO from Kyocera, NDK, or Rakon with the same frequency and output type, albeit with longer lead times and possible jitter differences. For risk mitigation, design your board with a footprint that accepts both a 5.0 x 3.2 mm MEMS package and a standard 5.0 x 3.2 mm quartz VCXO, and validate both in your jitter budget. Finally, confirm that the distributor’s stock is genuine and not countermarked, as high-frequency VCXOs are sometimes targeted by counterfeiters.

SIT3372AI-2B2-25NZ148.351648

MEMS OSC VCXO 148.351648MHZ LVDS

SiTime | SIT3372AI-2B2-25NZ148.351648 | $13.29

View Product →

Related Products

Part Number / DescriptionManufacturer PackageUnit PriceAvailability QTYAdd To Cart
MEMS OSC VCXO 148.351648MHZ LVDS MEMS OSC VCXO 148.351648MHZ LVDS148.351648 MHz VCXO LVDS Oscillator 2.5V 6-SMD, No Lead SiTime— $13.29 Out of Stock0 pcs
Nginx server needs to configure pseudo-static rules, click View configuration method