Home / News

RES SMD 887K OHM 1% 1/20W 0201 vs Alternatives: Comparison Guide

GQGF LIMITED · 2026-10-17

The Panasonic ERJ-1GNF8873C is a surface-mount fixed resistor, a member of the vast and unglamorous but utterly essential passive component family. Resistors are the workhorses of electronic design: they set bias points, divide voltages, terminate transmission lines, limit inrush currents, and define time constants in RC networks. The 0201 package—roughly 0.6 mm by 0.3 mm—places this part at the extreme small end of the SMD resistor spectrum, a size driven by the relentless miniaturization of smartphones, wearables, hearables, medical implants, and dense high-layer-count PCBs where every square millimeter of board area is contested. At 887 kΩ with 1% tolerance and a 1/20 W (50 mW) power rating, this particular value sits in the high-resistance, low-current regime, making it well suited to feedback dividers, pull-up and pull-down networks, bias setting in low-power analog front ends, and leakage-sensitive sensing circuits where a large resistance keeps quiescent current negligible.

When specifying a resistor of this class, several parameters dominate the decision. Tolerance is first: 1% is the practical default for precision dividers and reference-setting networks, while 0.1% parts command steep premiums and are rarely available in 0201. Temperature coefficient of resistance (TCR) matters enormously at high ohmic values—Panasonic's ERJ series typically offers TCR in the ±100 to ±200 ppm/°C range for 0201 high-value parts, so a 100 °C excursion on an 887 kΩ resistor can shift the value by roughly 1 to 2 percent, which can be the dominant error term in a divider. Power derating is critical: a 50 mW part at 70 °C ambient may derate to near zero at 125 °C, so thermal margin must be checked against the actual operating environment. Voltage rating (typically 25–50 V for 0201) and working voltage versus high-value leakage also deserve attention, as do solderability, sulfur resistance (important in industrial and automotive environments), and moisture sensitivity level. Finally, placement tolerance and pick-and-place capability: 0201 bodies demand fine-pitch nozzles and careful pad design, and not every contract manufacturer is comfortable with them.

Compared with alternatives, the ERJ-1GNF8873C occupies a specific niche. Against 0402 and 0603 resistors of the same value and tolerance, the 0201 saves board area and parasitics but offers lower power dissipation and tighter assembly process windows; 0603 parts are cheaper per unit, easier to handle, and far more widely second-sourced. Against thin-film precision resistors, thick-film ERJ parts like this one are markedly less expensive and more available but carry worse TCR and long-term drift, so they suit general-purpose rather than instrumentation-grade applications. Against resistor arrays, a discrete 0201 offers layout flexibility and avoids the cross-talk and common-node constraints of networks, at the cost of more placements. Cost-wise, high-value 0201 resistors are commodity items priced in fractions of a cent at volume, though the 887 kΩ value is less common than decade values and may carry a modest availability premium. Panasonic's ERJ series is broadly stocked across distributors, but very high ohmic values in the smallest case sizes are thinner on the shelf than 10 kΩ or 100 kΩ staples.

Several industry trends are reshaping this category. Continued miniaturization pushes demand toward 0201 and even 01005, particularly in mobile and wearable segments, while automotive and industrial designs often resist the smallest sizes for reliability and inspection reasons. High-value, high-stability resistors are increasingly demanded by battery-powered IoT and medical sensing designs where nanoamp quiescent currents matter. Sulfur-resistant and AEC-Q200-qualified variants are growing as automotive electronics proliferate. Meanwhile, supply chain regionalization and inventory discipline have led distributors to narrow stocked values, making exact-value availability a real procurement variable. There is also a slow shift toward thin-film technology in small case sizes as precision requirements creep downward in cost-sensitive designs.

Choose the ERJ-1GNF8873C specifically when board space is at an absolute premium, when the circuit can tolerate 1% tolerance and thick-film TCR, when power dissipation is genuinely tiny (microamps to low milliamps), and when the design is a high-volume consumer or portable product where the 0201 footprint and Panasonic's consistent quality and availability justify the assembly discipline. Avoid it for high-voltage or high-power nodes, for precision instrumentation needing sub-0.5% stability over temperature, for hand-assembled or reworked prototypes, and for designs where a 0603 or 0402 part would meet requirements with less process risk.

On procurement, buyers should confirm lifecycle status directly with Panasonic or through authorized distributors, as the ERJ series is mature and active but individual values can be rationalized over time. Lead times for commodity chip resistors have normalized to a few weeks in most regions, though reel quantities and non-stocked values can stretch to 8–12 weeks. Second-source options include Yageo RC series, Vishay CRCW, KOA RK73, and Rohm MCR, all of which offer 0201, 1%, high-value parts with comparable specifications—but always verify TCR, voltage rating, and sulfur resistance rather than assuming equivalence. Where the exact 887 kΩ value is unavailable, a series or parallel combination of standard values can bridge the gap, though this adds placements. For volume programs, negotiate buffer stock and confirm the distributor's date-code policy, and qualify an alternate manufacturer during design rather than after a shortage hits.

ERJ-1GNF8873C

RES SMD 887K OHM 1% 1/20W 0201

Panasonic Electronic Components | ERJ-1GNF8873C | $0.10

View Product →

Related Products

Part Number / DescriptionManufacturer PackageUnit PriceAvailability QTYAdd To Cart
RES SMD 887K OHM 1% 1/20W 0201 RES SMD 887K OHM 1% 1/20W 0201887 kOhms ±1% 0.05W, 1/20W Chip Resistor 0201 (0603 Metric) Automotive AEC-Q200 Thick Film Panasonic Electronic Components— $0.10 Out of Stock0 pcs
Nginx server needs to configure pseudo-static rules, click View configuration method