Home / Focus on hot spots

0.33uF 50V X7R Ceramic Capacitor Comparison Guide: FA28X7R1H334KRU00

GQGF LIMITED · 2026-11-15

When specifying a ceramic capacitor such as the TDK FA28X7R1H334KRU00, buyers are selecting from one of the most ubiquitous passive component families in electronics: the multilayer ceramic capacitor (MLCC). This particular part is a radial-leaded, through-hole device with a capacitance of 0.33 µF, a 50 V DC rating, and an X7R dielectric, housed in a conformally coated radial case. Ceramic capacitors serve a wide range of roles in electronic systems, from decoupling and bypassing power rails to filtering, coupling, and timing. The X7R dielectric, with its stable temperature characteristic of ±15% over −55 °C to +125 °C, positions this part as a general-purpose workhorse suitable for applications where moderate capacitance stability is required without the cost of C0G/NP0 dielectrics.

Several parameters matter most when choosing a ceramic capacitor of this class. Capacitance and tolerance determine the energy storage and filtering behavior; this part carries a ±10% tolerance. Voltage rating must account for derating—most designers apply at least a 50% derating for reliability, meaning a 50 V part is typically used in circuits operating at 25 V or below. Dielectric class is critical: X7R offers good volumetric efficiency but exhibits voltage coefficient effects (capacitance loss under DC bias), piezoelectric microphonics, and DC leakage characteristics inferior to C0G. Case size and mounting style affect assembly and thermal cycling; the radial through-hole format provides robust mechanical attachment for high-vibration or legacy designs. Finally, ESR and ripple current capability matter for power applications, and lifecycle and sourcing considerations increasingly weigh on selection as MLCC allocation fluctuates.

Compared with alternatives, the TDK FA28X7R1H334KRU00 occupies a specific niche. Against SMD MLCCs in 0805 or 1206 packages, the radial part is larger and more expensive per unit but offers superior mechanical robustness and easier hand-rework, making it attractive for industrial, automotive, and legacy through-hole boards. Against film capacitors of similar capacitance, the ceramic part is smaller and lower-cost but less stable and less suitable for high-precision analog filtering. Against electrolytic capacitors, the ceramic offers far longer life, lower ESR, and no electrolyte dry-out, though at 0.33 µF it cannot substitute for bulk decoupling on its own. Cost-wise, radial MLCCs typically carry a premium over commodity SMD parts, and availability can be tighter because through-hole MLCC production lines are fewer and older; buyers should expect longer lead times and narrower second-source options.

Industry trends are shaping this category significantly. The ongoing miniaturization toward SMD has reduced the number of suppliers maintaining broad through-hole MLCC portfolios, and several manufacturers have discontinued or trimmed radial lines. At the same time, demand from industrial, automotive, and high-reliability segments—where through-hole assembly remains common for vibration resistance and inspection ease—keeps a steady baseline of demand. Raw material supply of nickel and barium titanate, plus energy costs in manufacturing regions, have driven periodic price volatility. The push toward higher-temperature dielectrics (X8R, X8L) and AEC-Q200 qualification is also influencing new designs, though X7R remains the volume standard. Buyers should monitor manufacturer lifecycle notices closely, as radial MLCC end-of-life announcements have become more frequent.

Choose the TDK FA28X7R1H334KRU00 specifically when the design requires through-hole mounting for mechanical robustness, when the board is a legacy platform already tooled for radial parts, or when hand assembly and rework are anticipated. It is also a sensible choice for industrial control, power supply filtering, and instrumentation where X7R stability is adequate and C0G cost or size is prohibitive. Avoid it when board space is at a premium, when tight capacitance tolerance or low microphonics are required, or when high-volume automated SMT assembly favors reeled SMD parts. TDK's reputation for quality and consistent dielectric formulations adds confidence for applications where field reliability outweighs unit cost.

From a procurement standpoint, buyers should verify the current lifecycle status directly with TDK or authorized distributors, as radial MLCC lines are subject to discontinuation. Lead times for through-hole ceramics can run longer than SMD equivalents, particularly during allocation cycles, so maintaining buffer stock or qualifying alternates is prudent. Second-source options include other established MLCC makers offering radial X7R parts at 0.33 µF/50 V, though pin spacing, case dimensions, and coating must be cross-checked. Where the design permits, a drop-in SMD equivalent can serve as a cost and availability hedge. Finally, confirm authenticity through authorized channels—counterfeit passives are a real risk—and factor in minimum order quantities and packaging (bulk versus ammo pack) when planning production runs.

FA28X7R1H334KRU00

CAP CER 0.33UF 50V X7R RADIAL

TDK Corporation | FA28X7R1H334KRU00 | $0.37

View Product →

Related Products

Part Number / DescriptionManufacturer PackageUnit PriceAvailability QTYAdd To Cart
CAP CER 0.33UF 50V X7R RADIAL CAP CER 0.33UF 50V X7R RADIAL0.33 µF ±10% 50V Ceramic Capacitor X7R Radial TDK Corporation— $0.37 Out of Stock0 pcs
Nginx server needs to configure pseudo-static rules, click View configuration method